Command strips...
- Chuck
- Posts: 2886
- Joined: Sun Nov 25, 2012 10:31 am
- Location: Blue Mountains NSW
Command strips...
About 3 months ago I used these hanging strips to put 3 picture frames up on a dining room painted wall, & well... I was in a hurry & literally stuffed it well & truly.
Removed the red liner & pressed it to the back of the picture frame ... see where this is going now?
Then removed the Black liner & pressed the frame to the wall!!!
Three picture frames - 3 times - 3 stuff ups!
I completely for got the first step - remove red liner & press to the back of the hanger ... THEN remove black liner & press hanger to the wall !!!
So now I have those 3 picture frames hanging on the wall with no 'tail' piece available to safely remove them.
How the hell am I going to remove these mongrels without ripping parts of the wall off with them.
The are all flat against the wall with virtually no space to access behind them.
Any brilliant ideas, pretty please?
Removed the red liner & pressed it to the back of the picture frame ... see where this is going now?
Then removed the Black liner & pressed the frame to the wall!!!
Three picture frames - 3 times - 3 stuff ups!
I completely for got the first step - remove red liner & press to the back of the hanger ... THEN remove black liner & press hanger to the wall !!!
So now I have those 3 picture frames hanging on the wall with no 'tail' piece available to safely remove them.
How the hell am I going to remove these mongrels without ripping parts of the wall off with them.
The are all flat against the wall with virtually no space to access behind them.
Any brilliant ideas, pretty please?
Chuck & Catriana
aka Geriatric Gypsies.
2018 VW Tiguan.
White.
aka Geriatric Gypsies.
2018 VW Tiguan.
White.
-
- Posts: 3472
- Joined: Fri Nov 23, 2012 9:08 pm
- Location: Rothwell
Re: Command strips...
Did that once many years ago & I think I managed to slip a knife behind and gently prise from wall but it was only a very small frame so easy to get behind. Good luck.
Time is passing too quickly so live life to the full with your spouse/partner while you still have she/he by your side.
http://bkmcl.wordpress.com/2013/03/12/o ... m-24-2-13/#
http://bkmcl.wordpress.com/2013/03/12/o ... m-24-2-13/#
- Greynomad
- Posts: 8034
- Joined: Tue Dec 04, 2012 4:16 pm
- Location: Rutherglen, Vic.
Re: Command strips...
A long, thin-bladed knife, or a spatula slipped into the wall/frame gap might do the trick.
Working close to the sticky tape, slowly & gently twist the blade to ease the sticky stuff away from the wall. Move the blade from one side to the other once you get some movement, & keep alternating.
Been there, done that.
Working close to the sticky tape, slowly & gently twist the blade to ease the sticky stuff away from the wall. Move the blade from one side to the other once you get some movement, & keep alternating.
Been there, done that.
Regards & God bless,
Ray
--
"Insufficient data for a meaningful answer."
Isaac Asimov, "The Last Question"
"I refuse to drink water, because of the disgusting things fish do in it"
W.C.Fields
Ray
--
"Insufficient data for a meaningful answer."
Isaac Asimov, "The Last Question"
"I refuse to drink water, because of the disgusting things fish do in it"
W.C.Fields
- supersparky
- Posts: 7309
- Joined: Mon Nov 26, 2012 7:00 pm
- Location: Home on the beautiful Gold Coast for a while.
Re: Command strips...
Chuck, Try sliding the frame up the wall. You may find it will stretch the tape and hopefully lose adhesion. If it doesn't work for the first one. Stop.
Cheers
David
David and Terrie with Bandit the travelling companion
2006 Winnebago Alpine
Recently retired and loving it.
David
David and Terrie with Bandit the travelling companion
2006 Winnebago Alpine
Recently retired and loving it.
- jon_d
- Posts: 3579
- Joined: Thu Apr 11, 2013 6:37 pm
- Location: bedford
Re: Command strips...
Can you wall paper over it?
- El Gringo
- Posts: 398
- Joined: Sat Dec 28, 2013 1:48 pm
- Location: Adelaide SA
- Contact:
Re: Command strips...
Use some fishing line and saw it back and forth, should detach fairly easily...
Cheers,
Cheers,
Bernie B
I plan to stop procrastinating tomorrow.
I plan to stop procrastinating tomorrow.
- dream4red
- Posts: 4165
- Joined: Fri Nov 23, 2012 8:46 pm
- Location: Central Coast NSW
Re: Command strips...
Hair dryer on full heat will lift the bloomin things
Deborah
Just get out there and enjoy life
Just get out there and enjoy life
-
- Posts: 231
- Joined: Tue Dec 11, 2012 3:39 am
- Location: Dungog NSW
Re: Command strips...
Hacksaw blade with heavy fishing line on each end, or you could use a light string on the blade as well.
Oka 4WD camper/motorhome, 1100w solar, 400ah lithium, diesel heating, HWS and cooking
-
- Posts: 4089
- Joined: Sat Dec 29, 2012 4:06 pm
- Location: Lake Macquarie. NSW.
Re: Command strips...
Maybe try a heated guitar string, worked for us removing a small plaque.
Shirley & Bruce.
-
- Posts: 7159
- Joined: Thu May 07, 2020 7:57 pm
Re: Command strips...
Was that a "G" string Shirley ?? hehe
Couldn't resist .
Bernie .
Couldn't resist .
Bernie .