Good morning daily
-
Dot
- Posts: 25111
- Joined: Fri Nov 23, 2012 6:12 pm
- Location: Strathalbyn SA
- Has thanked: 15 times
- Been thanked: 101 times
Re: Good morning daily
Go on rub it in, that Nigel needs a good spanking for telling fibs. I thought you were going to spray those calthrop when we were over there.?
Slack TerrySlack. 
Queen of the Banal & OT chatter and proud of it. If it offends you then tough titty titty bang bang.
Re: Good morning daily
Good morning everyone.
I spent much of yesterday changing the two lefthand side rear tyres on the motorhome ..
I had to get a neighbour over to accist me removing the inner nut's... probably put on with a rattle gun
I need a socket to fit the inner nut's for my torque converter ... that would make things easier..
I still have the other side to do.. but not today..
I was also planning to mow the lawns... today.. maybe..
And I had a win win lotto
...26 lousy bucks
...
But it's bacon and eggs day again... only seems like yesterday we had them
Keep safe everyone..
Bernie.
I spent much of yesterday changing the two lefthand side rear tyres on the motorhome ..
I had to get a neighbour over to accist me removing the inner nut's... probably put on with a rattle gun
I need a socket to fit the inner nut's for my torque converter ... that would make things easier..
I still have the other side to do.. but not today..
I was also planning to mow the lawns... today.. maybe..
And I had a win win lotto
But it's bacon and eggs day again... only seems like yesterday we had them
Keep safe everyone..
Bernie.
You do not have the required permissions to view the files attached to this post.
-
jon_d
- Posts: 5054
- Joined: Thu Apr 11, 2013 6:37 pm
- Location: bedford
- Has thanked: 50 times
- Been thanked: 81 times
Re: Good morning daily
Att202. Good tyres Bernie.
I have them on the bus, 45000 so far of the rears.
Fronts are new, replaced the Michelins.
I have them on the bus, 45000 so far of the rears.
Fronts are new, replaced the Michelins.
-
RobertNotBob
- Posts: 2330
- Joined: Fri Jul 28, 2017 9:03 am
- Location: Adelaide, SA
- Has thanked: 5 times
- Been thanked: 25 times
Re: Good morning daily
No rain yesterday was hoping but mainly in the north. Still waiting for my heart surgeon to contact me. Will send a email on Monday to establish a paper trail. Nothing eslse planned so stay safe folks cheers Robert.
-
T1 Terry
- Posts: 16808
- Joined: Fri Nov 23, 2012 3:44 pm
- Location: Mannum South Australia by the beautiful Murray River
- Has thanked: 95 times
- Been thanked: 81 times
Re: Good morning daily
No point in spraying them, I pulled them out by hand .... but they dropped seed pods and carried on like it was only a minor set back.
From the time of your last visit, till a few days ago, they had recovered enough to fill two Bunnings buckets, bottom 1/3rd of the big size wheely bin ..... I reckon I can hear them growing now
T1 Terry
A person may fail many times, they only become a failure when they blame someone else John Burrows
Those who struggle to become a leader, rarely know a clear direction forward for anyone but themselves
Those who struggle to become a leader, rarely know a clear direction forward for anyone but themselves
-
BruceS
- Site Admin
- Posts: 9482
- Joined: Thu Nov 22, 2012 7:32 pm
- Location: Nebo, Qld
- Has thanked: 76 times
- Been thanked: 69 times
Re: Good morning daily
Research what chems they use to stop weeds growing up thru tennis courts.
Tordon sterilizes the soil for some years but is hard to get in 100% strength. Farmers used to use it on skeleton weed.
Tordon sterilizes the soil for some years but is hard to get in 100% strength. Farmers used to use it on skeleton weed.
*******************
BruceS
Nebo, Qld
********************
BruceS
Nebo, Qld
********************
-
Newcastle George
- Posts: 3371
- Joined: Wed Dec 05, 2012 3:21 pm
- Location: Kotara, Newcastle
- Has thanked: 2 times
- Been thanked: 15 times
Re: Good morning daily
I used a mixture of Tordon 50D and 245T (agent orange) to eradicate blackberries and I'm still suffering the side effects.
George
George
George, Julie, Leonie & Sean - Kotara, Newcastle
DIY 11.5M 1979 Bedford, Nissan/UD FE6T motor
DIY 11.5M 1979 Bedford, Nissan/UD FE6T motor
-
BruceS
- Site Admin
- Posts: 9482
- Joined: Thu Nov 22, 2012 7:32 pm
- Location: Nebo, Qld
- Has thanked: 76 times
- Been thanked: 69 times
Re: Good morning daily
Yes. Like most chems protection is vital.
Biggest problem in Viet was no one knew what was being sprayed & no protection offerred.
I used a lot of endosulphon (sp?) & to no effect that I know of. I did notify my pregnant neighbour before I sprayed.
Biggest problem in Viet was no one knew what was being sprayed & no protection offerred.
I used a lot of endosulphon (sp?) & to no effect that I know of. I did notify my pregnant neighbour before I sprayed.
*******************
BruceS
Nebo, Qld
********************
BruceS
Nebo, Qld
********************
Re: Good morning daily
I need a one inch female to one inch female socket for my torque muli tool...I can't find any on the www anyone have a clue as to getting one..
Bernie.
Bernie.
-
BruceS
- Site Admin
- Posts: 9482
- Joined: Thu Nov 22, 2012 7:32 pm
- Location: Nebo, Qld
- Has thanked: 76 times
- Been thanked: 69 times
Re: Good morning daily
No. There are a few fittings that can't be found. Thaf's why I made one to suit.
Bernie you need a 1" square fem to fit the torque & 1" hex for stud or is the stud squ too? Oh, of course it is.
Did you ever mic those studs & nuts?
Bernie you need a 1" square fem to fit the torque & 1" hex for stud or is the stud squ too? Oh, of course it is.
Did you ever mic those studs & nuts?
*******************
BruceS
Nebo, Qld
********************
BruceS
Nebo, Qld
********************