when to change anode

This category is for discussing a wide range of topics including hot water, cold water, heaters, black & grey holding tanks etc.
User avatar
T1 Terry
Posts: 15962
Joined: Fri Nov 23, 2012 3:44 pm
Location: Mannum South Australia by the beautiful Murray River
Has thanked: 50 times
Been thanked: 30 times

Re: when to change anode

Post by T1 Terry »

:lol: Set the vice and work bench on fire back in Day St Lake Illawarra when I cut a magnesium alloy anode with the angle grinder. All the swarf from the previous hacksaw cut and all the aluminium and metal fillings along with the oil etc that had built up of the yrs, all went up. Hard to put out a manganese fire because it creates its own oxygen
A person may fail many times, they only become a failure when they blame someone else John Burrows
Those who struggle to become a leader, rarely know a clear direction forward for anyone but themselves
User avatar
Dot
Posts: 24720
Joined: Fri Nov 23, 2012 6:12 pm
Location: Strathalbyn SA
Been thanked: 37 times

Re: when to change anode

Post by Dot »

BernieQ wrote: Sat Sep 21, 2019 9:03 am I wagged it that day Bruce .
Bernie .
You as well!! ;) ;)
Queen of the Banal & OT chatter and proud of it. If it offends you then tough titty titty bang bang.
User avatar
supersparky
Posts: 8784
Joined: Mon Nov 26, 2012 7:00 pm
Location: Home on the beautiful Gold Coast for a while.
Has thanked: 81 times
Been thanked: 66 times

Re: when to change anode

Post by supersparky »

T1 Terry wrote: Sat Sep 21, 2019 10:39 am :lol: Set the vice and work bench on fire back in Day St Lake Illawarra when I cut a magnesium alloy anode with the angle grinder. All the swarf from the previous hacksaw cut and all the aluminium and metal fillings along with the oil etc that had built up of the yrs, all went up. Hard to put out a manganese fire because it creates its own oxygen
T1, I have a mental picture of you trying to put that one out. :lol: :lol: :lol: Sorry for laughing so hard. :roll: :roll: :roll:
Almost did the same thing myself. Putting it out is fun isn't it!
Cheers
David

David and Terrie
2006 Winnebago Alpine
Not all who wander are lost.
User avatar
Craig
Posts: 774
Joined: Fri Dec 14, 2012 9:28 pm
Location: on the east coast.

Re: when to change anode

Post by Craig »

Do not replace it evety 6 months Dot. It is an inspection replace it when you have about 25% of anode remaining. Also don't go overboard with teflon tape when reinstalling the old anode. If you use too much you will isolate the anode from the tank and the anode won't do its job and the tank will rot away rather than the anode.
Full time on the road in an Alpine 2855
User avatar
Craig
Posts: 774
Joined: Fri Dec 14, 2012 9:28 pm
Location: on the east coast.

Re: when to change anode

Post by Craig »

Also I only ever use the genuine suburban anode. It is a magnesium anode. There were some cheap brand anodes available several years ago that were very slow to sacrifice themself. And if the anode isn't wasting away then your water heater is.
Full time on the road in an Alpine 2855
User avatar
supersparky
Posts: 8784
Joined: Mon Nov 26, 2012 7:00 pm
Location: Home on the beautiful Gold Coast for a while.
Has thanked: 81 times
Been thanked: 66 times

Re: when to change anode

Post by supersparky »

I have a spare in the cupboard somewhere. Another big thanks to the members of this forum for reminding me to get of my butt and do something. :D
Cheers
David

David and Terrie
2006 Winnebago Alpine
Not all who wander are lost.
User avatar
Greynomad
Posts: 9025
Joined: Tue Dec 04, 2012 4:16 pm
Location: Rutherglen, Vic.
Has thanked: 28 times
Been thanked: 61 times

Re: when to change anode

Post by Greynomad »

Dot,
We do a remove-and-check system.
When we can see bits of the central spine rod, we replace it.

Bruce,
In high school, our science teacher lit a piece of Magnesium wire (wearing welders gloves & using a looong pair of pliers) ...
He then dropped it into a bucket of water!
It kept burning & boiled the water. :shock:

Warned us all not to try this at home... and that even a CO2 extinguisher wouldn’t put it out. :o

And in 1955 I remember a Mercedes race-car crashed & burned at Le Mans, killing 80-odd spectators. It had a body made entirely of Magnesium alloy... to save weight.
Mercedes dropped out of motor racing after that. Only resumed about 1989.
Regards & God bless,
Ray
--
"Insufficient data for a meaningful answer."
Isaac Asimov, "The Last Question"

"I refuse to drink water, because of the disgusting things fish do in it"
W.C.Fields
User avatar
SteveW
Posts: 2343
Joined: Sun Dec 09, 2012 9:03 pm
Location: Glenelg, South Australia

Re: when to change anode

Post by SteveW »

When your hot water comes out milky you should have done it months ago! Does that help?
Steve Williams
http://stevew1945blog.com/

Every absurdity has a champion to defend it.
Oliver Goldsmith. 1728 -1774
User avatar
T1 Terry
Posts: 15962
Joined: Fri Nov 23, 2012 3:44 pm
Location: Mannum South Australia by the beautiful Murray River
Has thanked: 50 times
Been thanked: 30 times

Re: when to change anode

Post by T1 Terry »

Greynomad wrote: Sat Sep 21, 2019 11:01 pm Dot,
We do a remove-and-check system.
When we can see bits of the central spine rod, we replace it.

Bruce,
In high school, our science teacher lit a piece of Magnesium wire (wearing welders gloves & using a looong pair of pliers) ...
He then dropped it into a bucket of water!
It kept burning & boiled the water. :shock:

Warned us all not to try this at home... and that even a CO2 extinguisher wouldn’t put it out. :o

And in 1955 I remember a Mercedes race-car crashed & burned at Le Mans, killing 80-odd spectators. It had a body made entirely of Magnesium alloy... to save weight.
Mercedes dropped out of motor racing after that. Only resumed about 1989.
That is why the older air cooled VW rear engine fires were a total vehicle destruction thing. The cases are a high percentage manganese alloy along with the gearbox and would you believe, the fuel tank is right over the gearbox with a bit of body sheet metal separating the two. The fire usually starts with a fuel fitting coming out of the carby and sprays petrol over the distributor cap and that is the end of the VW. Usually kombi's that go up this way because the majority were twin carb.

T1 Terry
A person may fail many times, they only become a failure when they blame someone else John Burrows
Those who struggle to become a leader, rarely know a clear direction forward for anyone but themselves
User avatar
supersparky
Posts: 8784
Joined: Mon Nov 26, 2012 7:00 pm
Location: Home on the beautiful Gold Coast for a while.
Has thanked: 81 times
Been thanked: 66 times

Re: when to change anode

Post by supersparky »

20190923_154213.jpg
Big test here. Posting a pic from my phone.
Replaced our anode today.
This is the old one.
Yeah. It worked. Who needs Facebook!!!
You do not have the required permissions to view the files attached to this post.
Cheers
David

David and Terrie
2006 Winnebago Alpine
Not all who wander are lost.

Return to “Plumbing, Hotwater & Heaters”