Slide out access to batteries - For T1

Post by **BruceS** » Sun Jan 19, 2020 1:16 pm

Wayne first you need to put your key in the ignition!!!
..........
............ then turn to the right for 2 clicks!!!

(BWS isn't that far away is it?)

Mrcoolabah1au · Post by **Mrcoolabah1au** » Sun Jan 19, 2020 5:11 pm

Yes ok thanks for that great message but talking about the slide out thing

Post by **T1 Terry** » Mon Jan 20, 2020 11:32 am

We can build you a slide out battery tray etc if you want Wayne, just need to bring the vehicle over here and get that wallet stuffed with folding money

Mrcoolabah1au · Post by **Mrcoolabah1au** » Mon Jan 20, 2020 2:42 pm

Wow yes ok thanks for that great message but just bin door arm is in the way

Post by **T1 Terry** » Tue Jan 21, 2020 11:26 am

Mrcoolabah1au wrote: ↑Mon Jan 20, 2020 2:42 pm Wow yes ok thanks for that great message but just bin door arm is in the way

I'm sure we can work around that problem Wayne, best let Margaret know soon when you want to do the job so she can book it in.

Mrcoolabah1au · Post by **Mrcoolabah1au** » Tue Jan 21, 2020 3:19 pm

Bigger problem yet but the battery back in today no power or very little pl20 does not work junsi not lighting up multi meter said 20 from solar fuses seen to be ok top and bottom set what next

Post by **BruceS** » Tue Jan 21, 2020 3:47 pm

Voltage between pos & neg on each end of the battery pack Wayne? If OK, follow the pos wire & test each side of the mega fuse or whatever is next along the line. Leave the neg on the battery.
Keep going until you find no volts. If no problems then put the pos back on the battery & chase the neg wire bit by bit.
There MUST be a bad connection somewhere.... or a little Gremlin involved!!

Mrcoolabah1au · Post by **Mrcoolabah1au** » Tue Jan 21, 2020 4:22 pm

Ok thanks will start checking now just have a Cuppa first

Mrcoolabah1au · Post by **Mrcoolabah1au** » Tue Jan 21, 2020 6:10 pm

71CE0FB4-4416-4952-83F7-E39F08997161.jpeg

Only 6 volt seem all connected

jon_d · Post by **jon_d** » Tue Jan 21, 2020 7:23 pm

I'm not a lithium bloke, but to me, the wiring looks all wrong.

https://www.ozervnews.com

Slide out access to batteries - For T1

Re: Slide out access to batteries - For T1

Re: Slide out access to batteries - For T1

Re: Slide out access to batteries - For T1

Re: Slide out access to batteries - For T1

Re: Slide out access to batteries - For T1

Re: Slide out access to batteries - For T1

Re: Slide out access to batteries - For T1

Re: Slide out access to batteries - For T1

Re: Slide out access to batteries - For T1

Re: Slide out access to batteries - For T1