Wayne world

Discussion about any electrical topic except 240 volts. Solar, converters, inverters, lights, battery chargers, etc
User avatar
T1 Terry
Posts: 15965
Joined: Fri Nov 23, 2012 3:44 pm
Location: Mannum South Australia by the beautiful Murray River
Has thanked: 50 times
Been thanked: 30 times

Re: Wayne world

Post by T1 Terry »

Mrcoolabah1au wrote: Fri Jan 24, 2020 3:22 pm Thanks pl20 working now
Solar must be working 16 amps at the moment 🤗
Is the Junsi up and working now?
A person may fail many times, they only become a failure when they blame someone else John Burrows
Those who struggle to become a leader, rarely know a clear direction forward for anyone but themselves
Mrcoolabah1au
Posts: 2699
Joined: Wed Jan 23, 2013 3:36 pm
Location: Tocumwal on the Murray river

Re: Wayne world

Post by Mrcoolabah1au »

No not working cell volt error 👹
Coolabah1au
Wayne nini
Mrcoolabah1au
Posts: 2699
Joined: Wed Jan 23, 2013 3:36 pm
Location: Tocumwal on the Murray river

Re: Wayne world

Post by Mrcoolabah1au »

Terry I ask Margret to get me a full control T1 box 📦 so will pay for it now and when we get time will come over and get it installed 🤗
Coolabah1au
Wayne nini
Mrcoolabah1au
Posts: 2699
Joined: Wed Jan 23, 2013 3:36 pm
Location: Tocumwal on the Murray river

Re: Wayne world

Post by Mrcoolabah1au »

Thanks for that great message yes I will have to see you sometime for a new box 📦
Coolabah1au
Wayne nini
Mrcoolabah1au
Posts: 2699
Joined: Wed Jan 23, 2013 3:36 pm
Location: Tocumwal on the Murray river

Re: Wayne world

Post by Mrcoolabah1au »

Will the alarm 🚨 did it’s thing 2.30 this so switch of the fridge and back to bed ready
for more solar tomorrow
sun just started to get up🤔
Coolabah1au
Wayne nini
User avatar
T1 Terry
Posts: 15965
Joined: Fri Nov 23, 2012 3:44 pm
Location: Mannum South Australia by the beautiful Murray River
Has thanked: 50 times
Been thanked: 30 times

Re: Wayne world

Post by T1 Terry »

Mrcoolabah1au wrote: Sun Jan 26, 2020 7:30 am Will the alarm 🚨 did it’s thing 2.30 this so switch of the fridge and back to bed ready
for more solar tomorrow
sun just started to get up🤔
Was it the alarm that woke you up, or the elbow in the ribs? :lol:
A person may fail many times, they only become a failure when they blame someone else John Burrows
Those who struggle to become a leader, rarely know a clear direction forward for anyone but themselves
Mrcoolabah1au
Posts: 2699
Joined: Wed Jan 23, 2013 3:36 pm
Location: Tocumwal on the Murray river

Re: Wayne world

Post by Mrcoolabah1au »

Thanks for the reply terry yes it was a alarm from the fridge have not set any thing just plug it all in so have not touch any settings on the pl or the victron the photo of the junsi with a message 👹
Coolabah1au
Wayne nini
Mrcoolabah1au
Posts: 2699
Joined: Wed Jan 23, 2013 3:36 pm
Location: Tocumwal on the Murray river

Re: Wayne world

Post by Mrcoolabah1au »

6925F8B7-70D8-4708-9DC5-C3BF4E61E664.jpeg
What does this mean 🤔
You do not have the required permissions to view the files attached to this post.
Coolabah1au
Wayne nini
User avatar
T1 Terry
Posts: 15965
Joined: Fri Nov 23, 2012 3:44 pm
Location: Mannum South Australia by the beautiful Murray River
Has thanked: 50 times
Been thanked: 30 times

Re: Wayne world

Post by T1 Terry »

Mrcoolabah1au wrote: Tue Jan 28, 2020 12:02 pm 6925F8B7-70D8-4708-9DC5-C3BF4E61E664.jpeg
What does this mean 🤔
Broken? ;)

OK, looking at the picture, second wire from the top of the connector strip is black, place the negative probe of your voltage meter in there, now put the positive probe into the next wire, the green one, the voltage should be 3.? volts. Move the positive probe to the next wire, the brown one and the voltage should be between 6v and 7v, move it to the white wire and the voltage should be between 9v and 10.5v, now the red wire and the voltage should be between 12v and 14v. If you don't get a reading on one wire, that fuse is probably blown, if the voltages are in a different order, you have the small voltage sensing wires mixed up on the battery.
4DD5FD25-F80F-423C-A59B-293205403E54.jpg
T1 Terry
You do not have the required permissions to view the files attached to this post.
A person may fail many times, they only become a failure when they blame someone else John Burrows
Those who struggle to become a leader, rarely know a clear direction forward for anyone but themselves
Mrcoolabah1au
Posts: 2699
Joined: Wed Jan 23, 2013 3:36 pm
Location: Tocumwal on the Murray river

Re: Wayne world

Post by Mrcoolabah1au »

Ok thanks yes the junsi is working now just changed all the fuses and rearranged a few wire to get that 3. 6, 9 , 12 volts to work 🤗
Just have to watch it for a couple of days now make it’s ok 🤔
Coolabah1au
Wayne nini

Return to “Low Voltage Electrical”