Hino Rb145A power steering

Advice and help involving any mechanical issues.
User avatar
VicA
Posts: 194
Joined: Sun Apr 14, 2013 5:35 pm
Location: Sale Victoria
Has thanked: 4 times

Hino Rb145A power steering

Post by VicA »

Hi .....This is probably a question for T1 ............The power steering reservoir is pressurising and pushing out the fluid .
First sign of problem was clattering noise from steering pump ....due to air i believe.....steering wheel vibrating in sympathy.
I have inspected the pressure relief valve and all looks good and drained most of the fluid and replaced with fresh .
Since i have done this the system is still pressurising the reservoir but there is no power assistance . Have to bleed it some how i think , but am at a lost as to how air can get in . Tomorrow i will pull the flexible hoses and inspect....this event happened suddenly ....there was no prior warning of issues.

Heres hoping
thank you
vic
User avatar
jon_d
Posts: 4677
Joined: Thu Apr 11, 2013 6:37 pm
Location: bedford
Has thanked: 42 times
Been thanked: 36 times

Re: Hino Rb145A power steering

Post by jon_d »

1. Possibly sucking air in on the low pressure side of the pump - Look for loose hose clamp, fluid restriction, wet spot when not running, torn oil seal on the pump.

2. Not enough fluid in the system and just needs topping up.


3. Jack up the front axle, with the engine idling, rotate the steering wheel slowly from side to side; and top up the tank.

4. Hoses on the tank are swapped over and the fluid is not drawing through the filter properly. (should be up the center and pushed through the filter)
User avatar
VicA
Posts: 194
Joined: Sun Apr 14, 2013 5:35 pm
Location: Sale Victoria
Has thanked: 4 times

Re: Hino Rb145A power steering

Post by VicA »

Thanks Bruce and Jon ........I have inspected all the hoses and pipes ,, no sign of leaks etc ......is a gear drive pump so can not see if the shaft seal is leaking .....will pull the pump when i can get time to it ....
Thanks again
cheers Vic
User avatar
Keith Morris
Posts: 2569
Joined: Fri Dec 28, 2012 11:09 am
Location: WYALKATCHEM, WA
Has thanked: 50 times
Been thanked: 2 times

Re: Hino Rb145A power steering

Post by Keith Morris »

"tanks""here---Vic
It's a Nice looking rig going by the atavar pic.
You can get joy just looking at it ( has it got a name) so no need to drive it and use the power steering.

Also saves on diesel that way. I'm sure that you have a video player in the unit, so you could just sit inside and watch a travel video CD disc thing. You can get the CD's from the library for free. That way you save on tyres so; win/win all ways.

I am full of suggestions since I have been taking these pills. Stay tuned for more ramble sessions after the next pill parade.
Keith
I'm now 87 years old, having experienced another birthday, and I'm still living in WA, single (gave up looking), white hair, no teeth, no money, no worries.
I plan to have another birthday next year.
User avatar
VicA
Posts: 194
Joined: Sun Apr 14, 2013 5:35 pm
Location: Sale Victoria
Has thanked: 4 times

Re: Hino Rb145A power steering

Post by VicA »

Thanks Keith ....all that is true......very economical to run at the moment .....I am pleased to see that you are home and having fun again...My wife has named it 'Hilda' ..... I have a few other names for it ....she has been a bitch so far .....needed a new head (very hard to find ) got a used one from china at great expense...motor seems good now ......difficulties with roadworthy...now power steering ..gees.


This morning have looked around the power steering again went thru the bleeding operation as per the manual ...but still not working so i think Bruce is on the money ....seems to me the fluid is getting contaminated with engine oil and that means to me likely seal failure.
cheers
Vic
User avatar
VicA
Posts: 194
Joined: Sun Apr 14, 2013 5:35 pm
Location: Sale Victoria
Has thanked: 4 times

Re: Hino Rb145A power steering

Post by VicA »

OK Bruce .....Will let you know after i have attacked ......my son is manager of the local bearing shop .....so will put him to work ....
Cheers
native pepper
Posts: 1357
Joined: Mon Feb 23, 2015 8:21 am
Location: Tasmania
Has thanked: 5 times
Been thanked: 4 times

Re: Hino Rb145A power steering

Post by native pepper »

The power steering on my cruiser was playing up, decided to rebuild it, but found could get a new one for less money than the parts. Put it on with the engine rebuild, be interesting to see how much of a difference it makes to the steering as it now has a new steering box in it as well.
User avatar
VicA
Posts: 194
Joined: Sun Apr 14, 2013 5:35 pm
Location: Sale Victoria
Has thanked: 4 times

Re: Hino Rb145A power steering

Post by VicA »

Hope fully only need seal/bearing 'O' rings etc

Have not seen a kit yet ......
Cheers
User avatar
VicA
Posts: 194
Joined: Sun Apr 14, 2013 5:35 pm
Location: Sale Victoria
Has thanked: 4 times

Re: Hino Rb145A power steering

Post by VicA »

Thanks Bruce .....
User avatar
jon_d
Posts: 4677
Joined: Thu Apr 11, 2013 6:37 pm
Location: bedford
Has thanked: 42 times
Been thanked: 36 times

Re: Hino Rb145A power steering

Post by jon_d »

It was the only site I could find my size Vic.
Bruce, who found it????? :roll:

Return to “Mechanical ... Nuts & Bolts”