Can't use the rattle gun ?
Bob
Bernie's u-bolt saga.
Re: Bernie's u-bolt saga.
No Jon wont work. Or explain more...
Bob not enough room for your tool, mine and the next doors wont move the nut up, we have tried its just a long hand job...unfortunately.
Bernie.
Bob not enough room for your tool, mine and the next doors wont move the nut up, we have tried its just a long hand job...unfortunately.
Bernie.
Re: Bernie's u-bolt saga.
My crude bolt remover.
Bernie.
You can see the one beside it how far down I have drawn it...Bernie.
You do not have the required permissions to view the files attached to this post.
Re: Bernie's u-bolt saga.
Believe it or not Bob I cant there is nowhere to jack it higher...to much other stuff in the way, and if it was possible it would have been done...I'm not happy being under it as it is...
There is only one spot forward of the axle and that's where the stand is. The only other is way back behind the steps into the bus. about a third of the distance back. The Isuzu was much easier...
Bernie.
There is only one spot forward of the axle and that's where the stand is. The only other is way back behind the steps into the bus. about a third of the distance back. The Isuzu was much easier...
Bernie.
-
- Posts: 4675
- Joined: Thu Apr 11, 2013 6:37 pm
- Location: bedford
- Has thanked: 42 times
- Been thanked: 36 times
Re: Bernie's u-bolt saga.
Bernie.
I'll try again.
Put the socket drive in the extension.
Pack some thin pieces of wood under the socket drive to support it. (ie hold it up.)
I'll try again.
Put the socket drive in the extension.
Pack some thin pieces of wood under the socket drive to support it. (ie hold it up.)
-
- Posts: 3946
- Joined: Sun Dec 09, 2012 9:24 am
- Location: central west nsw Tiaro QLD for winter
- Has thanked: 3 times
- Been thanked: 4 times
Re: Bernie's u-bolt saga.
Dig a holeBernieQ2 wrote: ↑Tue May 09, 2023 6:53 am Believe it or not Bob I cant there is nowhere to jack it higher...to much other stuff in the way, and if it was possible it would have been done...I'm not happy being under it as it is...
There is only one spot forward of the axle and that's where the stand is. The only other is way back behind the steps into the bus. about a third of the distance back. The Isuzu was much easier...
Bernie.

Bob
-
- Posts: 4675
- Joined: Thu Apr 11, 2013 6:37 pm
- Location: bedford
- Has thanked: 42 times
- Been thanked: 36 times
Re: Bernie's u-bolt saga.
brilliant Bob.
what about, turn the bus upside down?
see, bob and me are ideas men.
what about, turn the bus upside down?
see, bob and me are ideas men.
-
- Site Admin
- Posts: 9304
- Joined: Thu Nov 22, 2012 7:32 pm
- Location: Mannum, SA, 5238
- Has thanked: 36 times
- Been thanked: 36 times
Re: Bernie's u-bolt saga.
Still got 3 to go? I'd be making up a plate/puller with 2 or more high tensile, fine thread bolts.
the finer the thread the more 'pull' you'll get.
the finer the thread the more 'pull' you'll get.
*******************
BruceS
Mannum, SA
********************
BruceS
Mannum, SA
********************