seat belts

Show everyone your unique layout or assist others to get their units built and avoid the many pitfalls.
BernieQ2
Posts: 8256
Joined: Thu May 07, 2020 7:57 pm
Has thanked: 13 times
Been thanked: 25 times

seat belts

Post by BernieQ2 »

Don't know if this is the right area but, with seat belts the 'norm' is passengers seat belt comes from the left to the right and drivers the reverse.
Now my question, do they have to be so? is there a law (Qld) that says that is how it has to be.
Can one have the drivers seat belt come from left to right. (must clarify the seats have belts on board lap, no sash)
Personally I cant see a problem, and before some one says any thing about having a accident the release would be on the wrong side they cut the belts they don't even try to release them.
Opinions please.
Bernie.
User avatar
Greynomad
Posts: 9025
Joined: Tue Dec 04, 2012 4:16 pm
Location: Rutherglen, Vic.
Has thanked: 28 times
Been thanked: 61 times

Re: seat belts

Post by Greynomad »

I assume there is no prob with this, Bernie.
I had two extra seatbelted seats installed in a Coaster dinette some years ago.
Engineer was more interested in how sturdily the seat base-frames were anchored (direct to chassis) rather than which way the sash part went.
As it turned out, the only way outboard sash could be secured was over right shoulder of occupant. (To the left I would have needed a sky-hook! :shock: ) So I installed two 'driver-style' belts as you would have in a sedan.
Engineer could not see a problem with this. So I assume the reverse is also true.

Good luck...
Regards & God bless,
Ray
--
"Insufficient data for a meaningful answer."
Isaac Asimov, "The Last Question"

"I refuse to drink water, because of the disgusting things fish do in it"
W.C.Fields
BernieQ2
Posts: 8256
Joined: Thu May 07, 2020 7:57 pm
Has thanked: 13 times
Been thanked: 25 times

Re: seat belts

Post by BernieQ2 »

Thanks Ray, its one of those things you don't think of till it lands in your lap.
If I bump into my 'engineer' in Maryborough today I will run it by him.
Bernie.
User avatar
Swisslulu
Posts: 2309
Joined: Fri Nov 23, 2012 8:39 pm
Location: RV Homebase Fraser Coast Qld

Re: seat belts

Post by Swisslulu »

Hey, Bernie, we are going to Maryborough to check out the build and pick up mail today. I'll PM my mobile and if you want to catch up for a coffee, give me a call.
Cheers
Lesley
Our Blog: http://lesleyanderich.wordpress.com
User avatar
Dot
Posts: 24719
Joined: Fri Nov 23, 2012 6:12 pm
Location: Strathalbyn SA
Been thanked: 37 times

Re: seat belts

Post by Dot »

Qld rules :roll: :lol: Bernie we only have to have lap belts due to the age of the bus. Really cant see any probs where they clip as long as they are anchored correctly. :D
Queen of the Banal & OT chatter and proud of it. If it offends you then tough titty titty bang bang.
BernieQ2
Posts: 8256
Joined: Thu May 07, 2020 7:57 pm
Has thanked: 13 times
Been thanked: 25 times

Re: seat belts

Post by BernieQ2 »

Thanks all did by luck bump into my heavy vehicle engineer mod bloke today in Bunnings. He told me no problem where the seat belts are left or right.
So all good with that. Problem Solved.
Bernie.
I pmed you Swisslulu.
Pokey
Posts: 43
Joined: Wed Dec 05, 2012 3:27 pm

Re: seat belts

Post by Pokey »

One advantage of my old girl Bernie, so old it doesn't need belts.
User avatar
Dot
Posts: 24719
Joined: Fri Nov 23, 2012 6:12 pm
Location: Strathalbyn SA
Been thanked: 37 times

Re: seat belts

Post by Dot »

Pokey wrote:One advantage of my old girl Bernie, so old it doesn't need belts.
I do Pokey, looking at a couple of pullies as well. ;)
Queen of the Banal & OT chatter and proud of it. If it offends you then tough titty titty bang bang.
Pokey
Posts: 43
Joined: Wed Dec 05, 2012 3:27 pm

Re: seat belts

Post by Pokey »

Dot wrote:
Pokey wrote:One advantage of my old girl Bernie, so old it doesn't need belts.
I do Pokey, looking at a couple of pullies as well. ;)
Gee that's just greedy Dot, wanting more then one at a time. That is assuming my english comprehension is correct. A "pullie" one who is pulled :twisted:

Return to “Design & Layout ideas”