Bit deals

Discussion about any electrical topic except 240 volts. Solar, converters, inverters, lights, battery chargers, etc
Mrcoolabah1au
Posts: 2699
Joined: Wed Jan 23, 2013 3:36 pm
Location: Tocumwal on the Murray river

Bit deals

Post by Mrcoolabah1au »

Has any the deal they have on solar panels 4 x 125w for 675 what do you thing this would be a good deal only 800 x 800 mm I think may if I got 6 or 7 would give me plenty of power that if they are worth it? :?:
Coolabah1au
Wayne nini
Shirley
Posts: 4555
Joined: Sat Dec 29, 2012 4:06 pm
Location: Lake Macquarie. NSW.
Has thanked: 15 times
Been thanked: 26 times

Re: Bit deals

Post by Shirley »

Boy you would have heaps of power.
Shirley & Bruce.
User avatar
freechange
Posts: 42
Joined: Fri Feb 20, 2015 1:40 pm
Location: SE Qld

Re: Bit deals

Post by freechange »

Price is about right. Ask how they are packed and how do they handle any damage in transit. Freight insurance?
You'd need a decent regulator for that many.
John

In the end, it's not going to matter how many breaths you took, but how many moments took your breath away.
Mrcoolabah1au
Posts: 2699
Joined: Wed Jan 23, 2013 3:36 pm
Location: Tocumwal on the Murray river

Re: Bit deals

Post by Mrcoolabah1au »

Yes have a pl 40 sitting in the draw been there a while now ok
Coolabah1au
Wayne nini
Peter and Sandra
Posts: 249
Joined: Tue Dec 11, 2012 3:39 am
Location: Dungog NSW

Re: Bit deals

Post by Peter and Sandra »

Bit Deals are pretty good to deal with and the stuff they sell seems to be better quality than a lot of others. I've heard of a couple of panels damaged in transit that were replaced by them.
We've had four of their 125w panels running for about 4 years now with no problems. They are about half the price they were when we bought them ;-))
Oka 4WD camper/motorhome, 1100w solar, 400ah lithium, diesel heating, HWS and cooking
User avatar
Jon and Kay
Posts: 728
Joined: Tue Dec 04, 2012 5:08 pm

Re: Bit deals

Post by Jon and Kay »

I have bought several times from bit-deals. These mono panels should be good. Note: Bit Deals will also do a deal if you want an extra discount, just ask.
Jon
User avatar
BruceS
Site Admin
Posts: 9304
Joined: Thu Nov 22, 2012 7:32 pm
Location: Mannum, SA, 5238
Has thanked: 36 times
Been thanked: 36 times

Re: Bit deals

Post by BruceS »

Wayne if you are adding these to an existing 'string' you may need to match the existing cells as close as you can.
*******************
BruceS
Mannum, SA

********************
User avatar
Jon and Kay
Posts: 728
Joined: Tue Dec 04, 2012 5:08 pm

Re: Bit deals

Post by Jon and Kay »

BruceS wrote:Wayne if you are adding these to an existing 'string' you may need to match the existing cells as close as you can.
Ok, I'll bite. Why?
Jon
User avatar
BruceS
Site Admin
Posts: 9304
Joined: Thu Nov 22, 2012 7:32 pm
Location: Mannum, SA, 5238
Has thanked: 36 times
Been thanked: 36 times

Re: Bit deals

Post by BruceS »

I'm not sure of the exact details but I've read several times that if you have 5 X 145w X 12v panels and you add an extra panel of 1 X 125w X 12v then all 6 panels will be restricted to the lowest number .... 125w.
Likewise if you have the initial 5 panels and the shade goes over just one panel then it'll effect all of them equally.
Terry is probably better qualified to answer this question!!
*******************
BruceS
Mannum, SA

********************
User avatar
T1 Terry
Posts: 15965
Joined: Fri Nov 23, 2012 3:44 pm
Location: Mannum South Australia by the beautiful Murray River
Has thanked: 50 times
Been thanked: 30 times

Re: Bit deals

Post by T1 Terry »

Put up a link Wayne, the Vmp is all important as it must be 16v or higher for lithium batteries and 17v or higher for lead acid.
The issue with matching panels only refers to series string connection for MPPT controllers...... and I guess you already know my views on series string connection and cheap MPPT controllers :twisted: :lol:
The value in switching to smaller panels is the reduced loss from shade effect. Areas that may have shade at some time during the day will still have full sun during other parts of the day so the total days energy harvest is better. Probably more useful with lithium batteries, but still an advantage when using lead acid batteries as well. Blocking diodes are not required in parallel panel installations, only with series string systems as the voltage from a shaded panel is still high enough to block the flow of current back into the panel. The controller provides the blocking at night to stop the battery discharging into the panels. You are better off removing the blocking diodes as each diode reduces the overall output from the panel, but only the blocking diodes, not the by pass diodes often found in larger panels

T1 Terry
A person may fail many times, they only become a failure when they blame someone else John Burrows
Those who struggle to become a leader, rarely know a clear direction forward for anyone but themselves

Return to “Low Voltage Electrical”