overwidth awning options

Show everyone your unique layout or assist others to get their units built and avoid the many pitfalls.
bagmaker
Posts: 886
Joined: Sun Jan 20, 2013 4:56 pm
Location: Victoria

overwidth awning options

Post by bagmaker »

Hi all, just checking out Jamglor's rig,
download/file.php?id=4217&mode=view
(drool) and was thinking "gee, if that awning was on my rig, I bet it would be over 2500mm wide.
Now I am sure theirs isn't, so its not a problem ;) but it got me thinking.
Mirrors and such are OK to have wider than 2500, something to do with safety and such, is there a loophole for awnings?
IF an awning was fixed to the body temporarily, so you didn't need tools to remove it?
Does anyone have options?

thanks,
User avatar
Dot
Posts: 24720
Joined: Fri Nov 23, 2012 6:12 pm
Location: Strathalbyn SA
Been thanked: 37 times

Re: overwidth awning options

Post by Dot »

With our bus we are very slightly (30mm) over width but the transport dept & the vehicle inspector for the roadworthiness were happy to accept the small over width. Also our bus tapers towards the top of the bus and that was a consideration and we do not have the awning with the arms on the side of the bus. Steve aka Ozefueler has his awning (an automatic one) on the top edge of his rigs roof.
Queen of the Banal & OT chatter and proud of it. If it offends you then tough titty titty bang bang.
User avatar
generdawg
Posts: 1253
Joined: Tue Dec 04, 2012 12:06 pm
Location: St Huberts Island

Re: overwidth awning options

Post by generdawg »

Dot wrote:... his awning (an automatic one) on the top edge of his rigs roof.
Think you will find that is a feature of Paradise too. See Daryl and Annette's.

Keeps them from collecting branches and being scraped off in tight bush access.

dawg
Experience is a wonderful thing. It helps you recognise a mistake when repeated.
User avatar
Dot
Posts: 24720
Joined: Fri Nov 23, 2012 6:12 pm
Location: Strathalbyn SA
Been thanked: 37 times

Re: overwidth awning options

Post by Dot »

Steve's is a domestic one and it went up where it is to get around the width thing/
Queen of the Banal & OT chatter and proud of it. If it offends you then tough titty titty bang bang.
bagmaker
Posts: 886
Joined: Sun Jan 20, 2013 4:56 pm
Location: Victoria

Re: overwidth awning options

Post by bagmaker »

:( then I would be overheight :shock: :lol:
User avatar
ozfueler
Posts: 259
Joined: Wed Dec 05, 2012 9:28 pm
Location: On the road

Re: overwidth awning options

Post by ozfueler »

Here's a photo of what Dot was describing on our coach, it's a full electric remote control house/patio awning (240 v) and only cost $1320. We've had it up for over 3 years now and are very happy with it. Steve...


Image
ozfueler
Lorraine and Steve travelling the H.O.A. In a 1976 Denning Mono towing a 1936 Ford coupe street rod or A framing a 1998 Terios.
User avatar
T1 Terry
Posts: 15963
Joined: Fri Nov 23, 2012 3:44 pm
Location: Mannum South Australia by the beautiful Murray River
Has thanked: 50 times
Been thanked: 30 times

Re: overwidth awning options

Post by T1 Terry »

ozfueler wrote:Here's a photo of what Dot was describing on our coach, it's a full electric remote control house/patio awning (240 v) and only cost $1320. We've had it up for over 3 years now and are very happy with it. Steve...


Image
Are those stairs automatic as well? I have run into a problem with the Aust design rules now requiring the stairs to be available when the door opens, no climbing out to set them up any more. This is to do with the fire regulation requirements that also require an outward opening door, no more bi fold door allowed.
How stable is the electric awning in the wind? I need to repair/refit the awning to the Mazda after an altercation with the power pole beside our driveway and then the rust removal/complete reconstruction of the roof. Maybe an auto awning could be a better option, we have the 240vac organised.
Any chance of a link to where you purchased the awning and stairs?

T1 Terry
A person may fail many times, they only become a failure when they blame someone else John Burrows
Those who struggle to become a leader, rarely know a clear direction forward for anyone but themselves
User avatar
Dot
Posts: 24720
Joined: Fri Nov 23, 2012 6:12 pm
Location: Strathalbyn SA
Been thanked: 37 times

Re: overwidth awning options

Post by Dot »

bagmaker wrote::( then I would be overheight :shock: :lol:
Another man boasting :roll: :lol: :lol: :lol:
Queen of the Banal & OT chatter and proud of it. If it offends you then tough titty titty bang bang.
User avatar
ozfueler
Posts: 259
Joined: Wed Dec 05, 2012 9:28 pm
Location: On the road

Re: overwidth awning options

Post by ozfueler »

The steps are elecric Terry, they sit in a channel below the internal steps and are supported on the top rail with bearings. A steel cable is atteched under the bottom step and runs to a 240 v low geared electric motor. The stairs descend under their own weight and in the last 25 cm of travel the bottom rails in the storage cavity slope downwards at about 30 degrees which allows the steps to drop and find their own level on the ground. To retract them the electric motor winds them up until they hit a switch at the top of their travel cutting power to the motor.


Image

We purchased the awning from a company in Thomastown, Vic, I'll hunt up his details and post them for you tomorrow. We usually retract the awning if the winds get too strong and never leave it out overnight or if we are not there. Bill C, 'Busman' has similar awnings and he anchors his to the side of his bus with retractable poles, i'm sure he can give you some details on them, hope this helps. Steve...
ozfueler
Lorraine and Steve travelling the H.O.A. In a 1976 Denning Mono towing a 1936 Ford coupe street rod or A framing a 1998 Terios.
User avatar
Newcastle George
Posts: 3284
Joined: Wed Dec 05, 2012 3:21 pm
Location: Kotara, Newcastle
Has thanked: 2 times
Been thanked: 8 times

Re: overwidth awning options

Post by Newcastle George »

From info supplied by Steve by PM some time ago.

"Hi George, sorry for the delay in responding been out of contact in western Queensland.

I can't remember the business name (old age) but it is in Thomastown Vic, and he did have other sizes and spare parts for them if necessary.

Gerald's number is 0418 394 190. You will probably have to leave a message and he will get back to you.

His main business is Aluminium caravan awnings but when he brings in a container of alloy he has room for the other things which are a sideline for pocket money, thus the low prices.

I found him very good to deal with, hope it goes well, let me know.

Regards Steve..."
George, Julie, Leonie & Sean - Kotara, Newcastle
DIY 11.5M 1979 Bedford, Nissan/UD FE6T motor

Return to “Design & Layout ideas”