PL 40 equalisation mode

Discussion about any electrical topic except 240 volts. Solar, converters, inverters, lights, battery chargers, etc
User avatar
T1 Terry
Posts: 15965
Joined: Fri Nov 23, 2012 3:44 pm
Location: Mannum South Australia by the beautiful Murray River
Has thanked: 50 times
Been thanked: 30 times

Re: PL 40 equalisation mode

Post by T1 Terry »

If you do not have a high enough voltage or at least 0.1hrs set in the REG equalise mode it will not have equalise available for forced selection via the battery voltage window
A person may fail many times, they only become a failure when they blame someone else John Burrows
Those who struggle to become a leader, rarely know a clear direction forward for anyone but themselves
User avatar
Craig
Posts: 774
Joined: Fri Dec 14, 2012 9:28 pm
Location: on the east coast.

Re: PL 40 equalisation mode

Post by Craig »

Thanks Terry, suspected that was the case. The weather forcast for here is sunny for the next few days so hopefully I will sort it tomorrow.
Full time on the road in an Alpine 2855
Mrcoolabah1au
Posts: 2699
Joined: Wed Jan 23, 2013 3:36 pm
Location: Tocumwal on the Murray river

Re: PL 40 equalisation mode

Post by Mrcoolabah1au »

Yes it nice and sunny solar pumping it in ok :D
Coolabah1au
Wayne nini

Return to “Low Voltage Electrical”