Hyundai

Discussion about any electrical topic except 240 volts. Solar, converters, inverters, lights, battery chargers, etc
Mrcoolabah1au
Posts: 2699
Joined: Wed Jan 23, 2013 3:36 pm
Location: Tocumwal on the Murray river

Hyundai

Post by Mrcoolabah1au »

How the new toy 🚗 going or do we call it some thing else blade. Has been 🤔 or spare parts nice to here about the project and the working 👍
Coolabah1au
Wayne nini
User avatar
T1 Terry
Posts: 15962
Joined: Fri Nov 23, 2012 3:44 pm
Location: Mannum South Australia by the beautiful Murray River
Has thanked: 50 times
Been thanked: 30 times

Re: Hyundai

Post by T1 Terry »

The Blade is sitting rather dejected looking with its sill rails bashed in waiting for the NSW RMS to process the disposal of vehicle from the previous owner. then I can transfer the rego into my name, then register it in SA in my name, then start the insurance claim stuff to get the sill panels repaired. Can't lodge a claim until it is registered in my name. Once I get the insurance bit under way I'll try to find time to pull the batteries, controller and motor out so it can be put in a bake oven when the do the respraying of the repaired bits.

The Blade does drive, just an issue with it cutting out if pushed too hard and this is either an over heating issue or bits failing in the controller ..... or a combination of the two.
All the other bits are to make it more operator friendly and then extend the range so we can go to Adelaide and back on a single charge.

T1 Terry
A person may fail many times, they only become a failure when they blame someone else John Burrows
Those who struggle to become a leader, rarely know a clear direction forward for anyone but themselves
Mrcoolabah1au
Posts: 2699
Joined: Wed Jan 23, 2013 3:36 pm
Location: Tocumwal on the Murray river

Re: Hyundai

Post by Mrcoolabah1au »

🥳🥳🥳🤔👍🚗
Coolabah1au
Wayne nini

Return to “Low Voltage Electrical”