G'Day All,
I have a Morning Star MPPT 60 regulator. Normally on the panel it reads, "absorb"or "float" but from time to time it reads, "MPPT" in the same location on the panel. I can't find a reference in the Morning Star literature or manuals. Anyone have an idea. It doesn't seem to bother the regulator and doesn't read as a fault code.
Dirk
Panel reading MPPT reg.
-
Kelvin12
- Posts: 889
- Joined: Wed Nov 28, 2012 4:42 pm
- Location: Urunga NSW 2455
-
Kelvin12
- Posts: 889
- Joined: Wed Nov 28, 2012 4:42 pm
- Location: Urunga NSW 2455
Re: Panel reading MPPT reg.
Just in case someone else wants this info. Reply back from Morning Star US. MPPT reading shows up when its in full charging mode, then swaps over to absorb and float later. Not an alarm or a problem just the process the regulator goes through.
Dirk
Dirk